18th Edition Multifunction Tester

The ALL NEW DL9110 Multifunction Tester has been designed to fully comply with the testing requirements of the 18th Edition.
It also incorporates many of the features that we have come to expect with modern MFTs.
It is designed to be worn around the neck with a comfortable harness, for easy function selecting and testing.

The DL9110 is the entry level instrument in the series packed full of features,
such as a Auto Start Loop & Continuity, the UK’s largest colour changing RGB LCD display screen indicating error, Auto RCD test with Ramp feature and has Full Range Protection if tester is accidentally connected to voltage on a dead test.

The DL9110 also comes complete with a toolbox style carry case, full calibration certificate and an option to upgrade from the 2 year warranty to a 3 year warranty.

All in all, the DL9110 offers incredible value for a feature packed MFT meeting all the safety and performance requirements of BS EN 61557.

The All NEW RCD-LOC XLT ‘patent pending’ feature allows loop testing without tripping any type of RCD or RCBO with very high accuracy.

"The ALL NEW DL9120 series multifunction tester has been designed to fully comply with the testing requirements of the 18th Edition.
Made in Britain, the DL9120 also incorporates many of the features that we have come to expect with modern MFTs and more.

The DL9120 includes a brand new RGB colour changing screen, a fully automated Continuity & Earth Loop Auto Start with a secondary display, and 2/3 wire high current loop with intelligent detection, amongst other features.
Incredible value for a feature-packed MFT that meets all of the safety and performance requirements of BS EN 61557.

The DL9130EV 18th Edition Advanced EV Multifunction Tester has been specifically designed for service engineers that offer EV installation as part of their electrical installation portfolio.

The DL9130EV has many new and exciting features critical to the safe verification of EVSE Charge Station Installation including a 6mA pure DC test for RDC-DD verification and a full EV testing sequence for verifying the DC protection provided by the EV charger, along with the Type A RCD protection.

Totally brand new feature specifically added to the DL9130EV is Rmax, this brand-new concept will automatically capture the maximum R1+R2/R2 continuity test reading which will register the result on the secondary display for recording once testing is complete. In addition, Di-LOG has added the Zmax feature.

Type B RCDs are becoming more frequent in PV and EV installations, so it is vital that when needed, your multifunction tester can perform a Pure DC test.  A variable RCD test has also been added to the DL9120 & DL9130EV enabling the user to dial in bespoke Ma values when the need arises.

Along with a brand new RGB colour changing screen that visually indicates potential pass/fail conditions, the DL9130EV offers, at the press of a button, intelligent user features.  Zmax, which will record the maximum Zs test recorded during a recording session, a fully automated Continuity & Earth Loop Auto Start with a secondary display to capture the recorded results.  Never seen before on a multifunction tester, is the 2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection.

The DL9130EV offers incredible value for a feature-packed MFT meeting all the safety and performance requirements of BS EN 61557."

The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charger.

Supplied with a type 1 and type 2 connector plug specifically designed for testing, the DLEV1 kit will also simulate PE Pre-test, CP Error “E” and PE Error with the added feature of CP signal output and load connection.

The DLEV1 has a 13A socket for MFT mains lead or can be used for inline load connection.

In addition to this, there are also 4mm input terminals for single or 3-phase connections."