Product Number(s):
95:021:645 - Cameo 7.2kW

Approvals:
BEAB approved.
Manufactured in the UK in a BS EN ISO 9002 registered factory.

Controls:
Single-turn rotary control dial.

Outer Casing:
Durable white high impact polystyrene plastic case.

Rating:
Cameo:7.2kW@ 240V

Safety Features:
Thermal cut-out prevents product from overheating. Pressure sensor cuts off power if flow is inadequate. Flow stabilising valve compensates for pressure variations to control outlet temperature.

Water Container:
Copper.

Electrical:
Cable entry at rear or base. For most installations 6mm cable permanently connected to the supply through a double-pole linked isolating switch with a 30A mimimum breaking capacity. All electrical work must comply with the latest IEE wiring regulations.

Fixing:
Backplate secured by two fixing screws and wall plugs supplied.

Guarantee:
Two-year product guarantee with on-site service support from date of purchase. For more detailed guarantee information contact Heatrae Sadia.

Plumbing:
Water connected to mains by 15mm o.d pipe at base via 'Push Fit' connector.
Minimum pressure:0.1 MPa (1 bar 14.5psi) Maximum pressure:0.7 MPa (7 bar 100psi)