Product Number(s):
95:021:515N - 7.2kW
95:021:516N - 8.5kW

Approvals:
BEAB approved.
Manufactured in the UK in a BS EN ISO 9002 registered factory.

Outer Casing:
Durable white thermoplastic case with dual texture white and grey control lever.

Rating:
Sapphire:7.2kW, 8.5kW @ 240V.
Sapphire:6.6kW, 7.8kW @ 230V.

Safety Features:
Thermal cut-out prevents product overheating.
Pressure sensor cuts off power if flow is inadequate.
Flow stabilising valve compensates for pressure variations to control outlet temperature.

Water Container:
Copper.

Electrical:
6mm² cable (for most installations.).
Products must be permanently connected to the supply through a double-pole linked isolating switch with 40A minimum breaking capacity.
All electrical work must comply with IEE wiring regulations.

Fixing:
Backplate secured by three fixing screws (supplied).
Top, bottom, side or rear entry points for services; removable lower section gives unrestricted access for plumbing and cable entry.

Plumbing:
Water connected to mains by 15mm o.d. pipe with compression fittings.
Minimum pressure 0.9bar (13psi), Maximum 10bar (145psi).