MandreX Hole Saw kits are available in professional cases which are easy to carry and fitted with the highest quality interior. Each kit includes a MandreX ONE CLICK Hole Saw system, spare pilot drill and hexagon key wrench.

Long lasting Bi-metal Hole Saws with unique ejection holes for extra chip release and weight reduction. Hardened steel, in combination with MandreX's special tooth geometry, provides the smoothest cut, requiring less feed pressure.

M42 High-Speed Steel
M42 high speed steel is a cobalt molybdenum tools steel - the addition of 8% cobalt means that M42 delivers superior red-hardness when compared to M2. The composition of M42 makes for a good balance of toughness and hardness and can be found widely used for all types of cutting tools, often used for machining materials and super alloys that are difficult to machine.

Each hole saw comes supplied with an MXqs adaptor for use with MandreX's unique ONE CLICK arbor system - replacing and mounting each hole saw takes a matter of seconds!

MandreX ONE CLICK Arbor & Adapter Starter kit with HEX Shaft.

Complete with 125mm pilot drill and HEX shaft -
this is the ideal way to get you started with the fantastic Mandrex ONE CLICK system!

To get you started, this kit enables you to fit your current system with the ONE CLICK adapter utilising the common thread used on most hole saws such as Bosch, Starrett, Lenox, Morse to name but a few.

The MXqs arbors can be used on all drilling machines, in combination with all hole saws.

Just choose the correct combination of arbor and pilot drill and start drilling!

MXqs ONE CLICK adaptors for all types of hole saws.

MandreX Pilot Drill Bit with 135 degrees split point for smooth drilling and accurate centering.

Why use Mandrex Pilot Drills?
Many hole saw pilot drill bits have an angled chamfered slot for the grub screw to tighten on to - MandreX are manufactured with a flat edged slot. Given that the angled flat face or chamfered edge on many standard pilot drills causes a problem for the pilot drill to often fall out of the arbor, users are finding the benefit of the milled slot that, even if the grub screw is slightly loose, the pilot drill is much less likely to fall out or even spin whilst drilling.

Long lasting Bi-metal Hole Saws with unique ejection holes for extra chip release and weight reduction. Hardened steel, in combination with MandreX's special tooth geometry, provides the smoothest cut, requiring less feed pressure.

M42 High-Speed Steel
M42 high speed steel is a cobalt molybdenum tools steel - the addition of 8% cobalt means that M42 delivers superior red-hardness when compared to M2. The composition of M42 makes for a good balance of toughness and hardness and can be found widely used for all types of cutting tools, often used for machining materials and super alloys that are difficult to machine.

Each hole saw comes supplied with an MXqs adaptor for use with MandreX's unique ONE CLICK arbor system - replacing and mounting each hole saw takes a matter of seconds!

MandreX Cooling Gel is a modern, high quality cutting lubricant with a high gap-filling propensity and excellent cooling properties.

MandreX Cooling Gel can be used under normal circumstances for almost all drilling, tapping and cutting work. The product reduces friction, yields a nicely-finished surface and extends the service life of the cutting tools. The high-quality components that go to make up MandreX Cooling Gel also make it suitable for use on stainless steel and other hard materials.

Applications:
For optimum lubrication during drilling, cutting and tapping.
Suitable for both hard and soft metals. Also suitable for stainless steel.